Columbia Marking Tools

Modelli inColumbia Marking Tools CatalogImpact Markers
Risultati 1-8 di 8
< Pagina precedente1Pagina successiva >
Risultati per pagina:
Nome
Titolo
Slide-A-Marker 451 Series
Numero parte
Fornitore
Descrizione

Slide-A-MarkTM Model 451

Compact and Reduced Sound Model 451 4-TON: This model is the smallest of Slide-A-Mark series. The solid cast iron construction contributes to the quiet marking capabilities of this system. The Slide-A-Mark feature acts as a self clamping device, and allows for minimal fixturing. Radial rod orientation becomes infinite by loosening the front collar clamp on the rod.

Features:

  • 3 Standard rod styles to hold the stamps offer multi-character OA or OAS63, and single character OB
  • 2 different approach strokes: 2 ½" and 4 ½"
  • Integrated position sensors offer the added benefit to integrators

This marker comes standard in the non-lube version for use with "dry" filtered air.

Recommended Air Hose: 3/8"" I.D. minimum

Recommended Air Valve: 3/8" 4-way solenoid valve

Operating Pressure: 20 to 80psi Max. Marking Pressure: 8000lbs(at 80psi)

Stamp Capacity Rod Style "B" (1) Pc CM9X round insert 1/16" to 1/4" character. Multi-character insert available for smaller character sizes.

Stamp Capacities Rod Style "A" (8) Pc's 1/16" Char. CMG06 Stamp Inserts(4) Pc's 1/8" Char. CMG13

Stamp Inserts Stamp Capacities Rod Style "AS63" (10) Pc's 1/16" Char. CMG06 Stamp Inserts (5) Pc's 1/8" Char. CMG13 Stamp Inserts .

Categoria
Configurazioni?
Sì
Download
142
Aggiunto il
13 feb, 2012
Nome
Titolo
Slide-A-Mark 751 Series
Numero parte
Fornitore
Descrizione

Model 751 8-Ton:These systems offer thewidest array of options for integration. The Slide-A-Mark feature acts as a self clamping device, and allows for minimal fixturing. Radial rod orientation becomes infinite by loosening the front collar clamp on the rod. The models 751 and 851 are also offered with a wide range of holders and numbering heads.

  • 5 Standard rod styles to hold the stamps offer multicharacter OA or OAS75, single character OB, standard ball lock tooling mount OK, or custom press shank mount OH.
  • 4 different approach strokes: 2 1/2", 4", 6", and 8". 10" and 12" stroke lengths are available upon request.
  • Integrated position sensors offer the added benefit to integrators. These units offer the added feature of an optional advance and return position sens
  • Standard marker requires lubricated air. The NL non-lube version is required for "dry" air.

Recommended Air Hose: 3/8" I.D. minimum

Recommended Air Valve: 3/8" 4-way solenoid valve

Operating Pressure: 20 to 80psi Max. Marking Pressure: For 751 = 16000lbs (at 80psi) For 851 = 20000lbs (at 80 psi)

Stamp Capacity Rod Style "B"(1) Pc CM9X round insert 1/16" to 1/4" character. Multi-character insert available for smaller character sizes.

Stamp Capacities Rod Style "A" (10) Pc's 1/16 Char. CMG06 Stamp Inserts (5) Pc's 1/8 Char. CMG13 Stamp Inserts

Stamp Capacities Rod Style "AS75" (12) Pc's 1/16 Char. CMG06 Stamp Inserts (6) Pc's 1/8 Char. CMG13 Stamp Inserts

Tooling Mount Rod Style "K" Ball lock mount for standard tooling including holders and numbering heads

Tooling mount Rod Style "H" Press shank to mount custom tooling

Categoria
Configurazioni?
Sì
Download
348
Aggiunto il
13 feb, 2012
Nome
Titolo
Slide-A-Mark 851Series
Numero parte
Fornitore
Descrizione
Model 751 8-TonThese systems offer thewidest array of options for integration. The Slide-A-Mark feature acts as a self clamping device, and allows for minimal fixturing. Radial rod orientation becomes infinite by loosening the front collar clamp on the rod. The models 751 and 851 are also offered with a wide range of holders and numbering heads.

  • 5 Standard rod styles to hold the stamps offer multicharacter OA or OAS75, single character OB, standard ball lock tooling mount OK, or custom press shank mount OH.
  • 4 different approach strokes: 2 1/2", 4", 6", and 8". 10" and 12" stroke lengths are available upon request. Integrated position sensors offer the added benefit to integrators. These units offer the added feature of an optional advance and return position sens
  • Standard marker requires lubricated air. The NL non-lube version is required for "dry" air.

Recommended Air Hose: 3/8" I.D. minimum

Recommended Air Valve: 3/8" 4-way solenoid valve

Operating Pressure: 20 to 80psi Max. Marking Pressure: For 751 = 16000lbs (at 80psi) For 851 = 20000lbs (at 80 psi)

Stamp Capacity Rod Style "B"(1) Pc CM9X round insert 1/16" to 1/4" character. Multi-character insert available for smallercharacter sizes.

Stamp Capacities Rod Style "A" (10) Pc's 1/16 Char. CMG06 Stamp Inserts (5) Pc's 1/8 Char. CMG13 Stamp Inserts

Stamp Capacities Rod Style "AS75" (12) Pc's 1/16 Char. CMG06 Stamp Inserts (6) Pc's 1/8 Char. CMG13 Stamp Inserts

Tooling Mount Rod Style "K" Ball lock mount for standard tooling including holders and numbering heads Tooling mount Rod Style "H" Press shank to mount custom tooling

Categoria
Configurazioni?
Sì
Download
210
Aggiunto il
13 feb, 2012
Nome
Titolo
Model 88, 3 Ton Single Acting Air Impact Marker
Numero parte
Fornitore
Descrizione

Model 88 Specs:

  • Maximum Marking Pressure: 6,000 lbs (at 80psi)
  • Operating Pressure: 20 to 80psi
  • Recommended Air Hose: 3/8" I.D. minimum
  • Recommended Air Valve: 3/8" 3-way or 4-way solenoid valve

    Model 88Overview:

  • 3 mounting styles: standard angle bracket, reverse angle bracket, and straight sub-plate
  • 3 standard rod styles for different type/stamping die configurations
  • 2 different air port locations: standard end port or side port for restricted space installations
  • Keyed non-rotating rod
  • 2.5" approach stroke length

    The Model 88 Impact Markers are rugged and powerful, delivering up to 3 tons of impact force. These marking tools have patented shock absorbing bumpers at both ends of the stroke to prevent damage to the markers when bottoming out on the forward stroke and reducing the shock on return stroke.

    The Model 88 Impact Markers are dependable and have a very low investment cost. Custom mounting plates, rods and holders are available upon request. These marking tools can also be integrated into a turn-key station to fit your specific marking requirements.
    • Categoria
    Configurazioni?
    Sì
    Download
    1752
    Aggiunto il
    24 ago, 2007
    Nome
    Titolo
    Model 98, 8 Ton Single Acting Air Impact Marker
    Numero parte
    Fornitore
    Descrizione

    Model 98 Specs:

  • Maximum Marking Pressure: 16,000 lbs (at 80psi)
  • Operating Pressure: 20 to 80psi
  • Recommended Air Hose: 1/2" I.D. minimum
  • Recommended Air Valve: 1/2" 3-way or 4-way solenoid valve

    Model 98 Overview:

  • 3 mounting styles: standard angle bracket, reverse angle bracket, and straight sub-plate
  • 3 standard rod styles for different type/stamping die configurations
  • 2 different air port locations: standard end port or side port for restricted space installations
  • Keyed non-rotating rod
  • 2.5" approach stroke length

    The Model 98 Impact Markers are heavy duty marking tools, delivering up to 8 tons of impact force. These markers have patented shock absorbing bumpers at both ends of the stroke to prevent damage to the markers when bottoming out on the forward stroke and reducing the shock on return stroke.

    The Model 98 Impact Markers are cost effective, and standard units ship out in 24 hours. Custom mounting plates, rods and holders are available upon request. These marking tools can also be integrated into a turn-key station to fit your specific marking requirements.
    • Categoria
    Configurazioni?
    Sì
    Download
    1046
    Aggiunto il
    29 ago, 2007
    Nome
    Titolo
    Model 288, 3 Ton Double Acting Air Impact Marker
    Numero parte
    Fornitore
    Descrizione

    Model 288 Specs:

  • Maximum Marking Pressure: 6,000 lbs (at 80psi)
  • Operating Pressure: 20 to 80psi
  • Recommended Air Hose: 3/8" I.D. minimum
  • Recommended Air Valve: 3/8" 4-way solenoid valve

    Model 288 Overview:

  • 3 mounting styles: standard angle bracket, reverse angle bracket, and straight sub-plate
  • 3 standard rod styles for different type/stamping die configurations
  • 2 different air port locations: standard end port or side port for restricted space installations
  • Keyed non-rotating rod
  • Approach stroke length options of 2.5", 4" or 6"

    The Model 288 Impact Markers have a patented design, enabling them to deliver up to 3 tons of impact force. These marking tools include 3 basic styles: standard, extreme industrial, and submersible. Extreme industrial models are specially coated in a non-corrosive material for additional protection. Submersible units are both coated and keyless, and offer reliable marking in leak test applications.

    The Model 288 Impact Markers are dependable and have a very low investment cost. Custom mounting plates, rods and holders are available upon request. These marking tools can also be integrated into a turn-key station to fit your specific marking requirements.
    • Categoria
    Configurazioni?
    Sì
    Download
    2049
    Aggiunto il
    7 set, 2007
    Nome
    Titolo
    Model 298, 8 Ton Double Acting Air Impact Marker
    Numero parte
    Fornitore
    Descrizione

    Model 298 Specs:

  • Maximum Marking Pressure: 16,000 lbs (at 80psi)
  • Operating Pressure: 20 to 80psi
  • Recommended Air Hose: 1/2" I.D. minimum
  • Recommended Air Valve: 1/2" 4-way solenoid valve

    Model 298 Overview:

  • 3 mounting styles: standard angle bracket, reverse angle bracket, and straight sub-plate
  • 3 standard rod styles for different type/stamping die configurations
  • 2 different air port locations: standard end port or side port for restricted space installations
  • Keyed non-rotating rod
  • Approach stroke lengths of 2.5", 4" or 6"

    The Model 298 Impact Markers have a patented design, enabling them to deliver up to 8 tons of impact force. These marking tools come in 3 basic styles: standard, extreme industrial or submersible. Extreme industrial models are specially coated in a non-corrosive material for additional protection. Submersible units are both coated and keyless, and offer reliable marking in leak test applications.

    The Model 298 Impact Markers are dependable and have a very low investment cost. Custom mounting plates, rods and holders are available upon request. These marking tools can also be integrated into a turn-key station to fit your specific marking requirements.
    • Categoria
    Configurazioni?
    Sì
    Download
    826
    Aggiunto il
    7 set, 2007
    Nome
    Titolo
    Model 78, Mite-E-Mark Double Acting Air Impact Marker
    Numero parte
    Fornitore
    Descrizione

    Model 78 Specs:

  • Maximum Marking Pressure: 1,500 lbs (at 80psi) for 1" stroke and 2,200 lbs for 2" stroke
  • Operating Pressure: 20 to 80psi
  • Recommended Air Hose: 1/4" I.D. minimum
  • Recommended Air Valve: CMT TP valve or 1/4" 4-way valve

    Model 78 Overview:

  • 2 basic styles include standard or submersible (specially coated in a non-corrosive material for additional protection)
  • 2 mounting styles, foot or rear
  • 4 standard rod styles for different type/stamping die configurations
  • Keyed (non-rotating) or non-keyed (rotating) rod options
  • 1" or 2" approach stroke length available

    The Model 78 Impact Markers are air operated and offer 18 times the force of an air cylinder with the same bore. These marking tools are compact in their construction, allowing them to be installed in places with limited space.

    • Categoria
    Configurazioni?
    Sì
    Download
    5167
    Aggiunto il
    24 ago, 2007
    Fornitore verificato
    Tutti i prodotti per questo fornitore

    Informazioni su
    Columbia Marking Tools manufactures tools that mark metal and plastic.

    Dettagli di contatto
    Indirizzo:
    27430 Luckino Drive
    Chesterfield Twp., 48047
    Michigan, United States
    Telefono: 586-949-8400
    Fax: 586-949-8401
    Email:
    Sito web: http://www.columbiamt.com